Shower Upgrade 101 - Best Practices For New Unit Installation

Shower Upgrade 101 - Best Practices For New Unit Installation

Blog Article

Recurring Service Plans

Everyone has got their own unique beliefs when it comes to Simple ways to Install a Shower Cubicle on Your Own.

A successful shower installation requires careful preparation as well as a great deal of work. For the most part, you will need to do three types of tasks: mounting wall surfaces, mounting the plumbing, and also ending up wall surfaces.

Prep work

First of all, you must decide on the type of shower that you desire to set up. It is very important to establish whether the selected shower is capable of coping with particular systems and also can control a risk-free degree of water with the central heating boiler. Many shower systems nowadays are designed to be flexible to different water pressures (such as saved warm water and also cool keys).
It is likewise crucial to consider the water pressure and also the preparation of the piping and also water drainage for the shower

Various Kinds Of Shower Units

Push-on Mixer: The hose pipe and spray parts of the push-on mixer shower unit can be connected to the bathroom tap as per your requirement, and also the water temperature level can be readjusted by means of the taps. Push-on mixers are cheap and extremely straightforward to set up. Nevertheless, although the hose link is straightforward, it is quickly removed. Additionally, it is bothersome to change the temperature.

Bath/Shower Mixer: The hose and also spray of this kind of shower are combined with a bathroom mixer faucet, as well as the temperature can be readjusted with the bath faucets. It is an extremely inexpensive alternative as well as no extra plumbing is entailed. Nevertheless, the bath/shower mixers also experience troublesome temperature level control choices.

Manual Mixer: The tube as well as spray of a manual mixer shower device are a part of the wall system and also the hot and cold water products are linked to a solitary valve The temperature level and pressure of the water are regulated via either one or a range of handles (in more costly showers). Although temperature control is much easier in hand-operated mixer types, they are a lot more expensive than the previously stated mixers. They also need added plumbing of hot and cold water system pipes.

Thermostatic Mixer: The hose pipe and also spray of this shower type are a part of the wall surface unit and also the hot and cold water materials are attached to a single shutoff below too. It is total with an integrated stabiliser to self-adjust the water temperature and to avoid it from coming to be too hot. Among the biggest advantages of a thermostatic mixer shower type includes practical temperature level control. However, it is one of the most expensive of the different mixer alternatives.

Power Shower: A power shower is a single system having a powerful electric pump that can altering both the water pressure and also temperature. This kind of shower can be fitted if there is water from a cold water cistern as well as a warm water cyndrical tube. A power shower makes the adjustment of both pressure and also temperature level easy. On the other hand, it disagrees for water warmed directly by the shower or where the water is supplied by a mix central heating boiler under keys pressure.

Electric Shower: An electric shower is plumbed right into a keys cold water supply and it heats up the water electrically. It is very important to keep in mind that for this shower type to be set up, the keys stress requires to be at least 0.7 kg/sq cm (10lb/sq in). The system permits the temperature level and pressure to be changed by means of a handle. Versions with temperature level stabilisers are better as they remain unaffected by various other faucets in other places in operation within the household. A major disadvantage of electric showers is that the control handle just permits the alternative of heats at much less pressure, or lower temperatures at a greater pressure. This is troublesome in the winter when the spray is commonly weak and also the keys water is cooler. Nonetheless, this trouble is tackled in some versions which are readily available with a winter/summer setup.

Approach

Relying on the sort of shower you desire to mount, the shower head have to either be suited order to prevent its contact with the water in the bathroom listed below or the base tray, or it has to have a check shutoff.
Prior to beginning, it is a good idea to note the settings of the shower head as well as control, as well as to prepare the pipe-work involved. Additionally, the drainage system to remove the waste water will certainly require to be intended. Both settings of the cord path as well as the shower switch will additionally require to be taken into consideration if an immediate or electric shower unit is being installed.
Make use of the guideline overview supplied with the shower system to fit the shower control.Before fitting the pipelines that will supply the water to the shower system, it is important to remove the water system. In order to protect the pipelines, they must be given a water-proof covering as well as also fitted with separating valves. The pipelines can then be hidden right into the wall surface as well as glued over to neaten the overall appearance.
Fit the base tray, shower head, as well as fittings.
Connect the major shower control to the pipes that will be providing the water (This might need a female screw string adapter).
Reconnect the supply of water and examination the pipelines for any leakages, as some may require tightening up.
If you are installing an electric shower, keep in mind to switch off the power supply before making any electric connections. As soon as these links have been made (there need to be assistance within the instruction manual), the power supply can be switched over back on.

Readjusting Water Pressure to Suit Your Shower

The cold water tank can be raised to a higher height (often as little as 150mm (6inches)) by installation a strong wood assistance underneath it - possibly made up of struts and blockboards. If you pick this choice, the major as well as circulation pipes will certainly likewise need to be increased to fulfill the new elevation of the reservoir.
Conversely, a booster pump (a single pump or a dual/twin pump) can be fitted. Whichever kind is chosen, it needs to be connected into the power supply in order to run.

Piping as well as Water drainage

It is best to use 15mm size supply pipes, as well as make the go to the shower as short and also straight as possible so as to preserve optimal pressure and also reduce warmth loss. Additionally, by reducing the use of elbow joints for pipeline corners, you can reduce the resistance in the circulation of the water supply. You can accomplish this by flexing the pipes instead.

The Majority Of Common Errors

Going against or ignoring regional code constraints.

Using pipes that are also tiny.

Attaching copper to galvanized without utilizing a brass or dielectric suitable between the two.

Not utilizing tape or pipeline substance at threaded joints.

Not leveling your fixtures when mounting them.

Not mounting an air gap filling for fixtures.

Reducing supply stub outs also short to install the shutoff valves onto after the completed wall surface remains in place.

Not correctly lining up tubes right into installations or stop valves. (Requiring the nut onto the compression ring at an angle when the tubes goes to an angle will certainly cause a leak.).

When turning the water back on in your home, always run the outdoors tube shutoff or purge your toilets to bleed dirt as well as air from the lines. This debris can cause problems in your sink faucets and other plumbing trim.

Most Popular Shower Enclosure Options to Upgrade Your Bathroom

Frameless Shower Enclosures

Switching to a frameless shower enclosure can instantly add a modern feel to your bathroom. This type of shower enclosure eliminates the visual obstruction of frames, providing a seamless flow using fully customisable glass.

Since they are fully customisable, it fits all sizes and shapes of your bathroom space. You can also design it in a way suitable for an expansive spa shower.

In-line Shower Options

Another popular shower enclosure option you can use to upgrade your bathroom is an in-line shower. This type of shower installs a shower glass in-line with an adjacent wall, keeping water within the shower area.

You can have two options for in-line showers: hinged doors and sliding doors. An in-line shower with hinged doors allows you to have one glass shower door mounted on one side and open the door outwards. Meanwhile, in-line showers with sliding doors will enable you to save space but are more expensive.

Semi-Frameless Shower Enclosures

The semi-frameless shower enclosure is also an excellent shower enclosure option as it reduces the possibility of mould. Since the glass door is frameless, there’s no way soap and water will be stuck on it. But to ensure that there’s no way for mould to flourish in your bathroom, choose frameless shower enclosures instead.

Semi-frameless shower enclosures are the ideal choice if you adore the design of frameless showers but would prefer a more affordable solution. These types of shower enclosures have a range of options available by the glass manufacturing process in accordance with various height specifications.

You can also customise this type of shower enclosure. However, your options might be limited because of the standard sizes and heights.

Glass Block Shower Enclosure

If you don’t want a bathroom door and walk-in glass shower enclosures are not an option either, a glass block shower enclosure is for you. Glass blocks will allow your bathroom to access maximum daylight while having the privacy it offers. Also, glass block enclosures might require a bit more effort to clean than other enclosures, but they are durable and versatile options.

You can also be creative when using glass blocks for your bathroom. Since this type of shower enclosure is made of small glass blocks, you can easily create a unique shower enclosure shape. There are many options for thickness, styles, and colours, too.

Final Thoughts

Upgrading your bathroom with a new shower enclosure is a great way to add value to your home. Not only will it appear nice, but it will also be more functional and efficient. When choosing a shower enclosure, pick one that fits the style of your bathroom and your budget. It’s also paramount to take note of the pros and cons of each type before installation to ensure you don’t miss anything important.

https://gharpedia.com/blog/shower-enclosure-to-upgrade-bathroom/

As a reader about How to Build a Shower Enclosure for Your DIY Bathroom, I think sharing that portion was a good thing. Sharing is caring. You won't know, you may just be helping someone out. We thank you for reading our article about How to Install a Shower Enclosure .

Hire A Pro

Report this page